Toscana - Sliding

For this project, the client searched for a home elevator that would match the quality  of their new build in Western Australia’s Salter Point. After finalising the final design details and technical questions,  the client, architect and builder were happy to proceed...

After being delayed by another elevator supplier at the lift design stage, this client came to Lift Shop for a quick turn-around. The Pre-Engineered E2 was the perfect solution to ensure the elevator was installed before the client put the property on the market. The...

Due to the design of this sloped Mosman property, Lift Shop was asked to supply two home lifts to provide complete access to all levels. One to replace the old elevator between the garage and the home, and the second to service between the main lobby and the laundry....

In the Los Angeles suburb of Venice Beach, this client wanted an elevator that would integrate into the current property as well as be an exciting  feature of the home. Lift Shop’s E2 sliding door elevator was the perfect solution. The design: ConfigurationSingle...

With Luxury in mind, the owners of this new build in Bellevue Hill wanted nothing but the best for their new home.  After close collaboration with repeat architect Luigi Rosselli, Lift Shop was appointed to install an E2 lift to connect the 4 levels of the property....

Nestled high in the hills overlooking Los Angeles, this palatial home exudes luxury, convenience and celebrity appeal. The elevator of choice for such a perfect setting, an opposite through car brushed stainless steel E2 of course – all the way from Italy !! To view...

With a meticulous attention to detail, the level of thought and planning to every aspect of this beautiful home in Abbotsford makes it stand out from the crowd. With a Hamptons flavoured influence throughout the home, the end result is nothing short of stunning and...

This contemporary new build in Dover Heights had every design element carefully considered. One element included the installation of a two stop E2 home elevator by Lift Shop. The owners selected a modern pallet to tie the lift into the rest of the home's stunning...

Situated in one of the most prestigious suburbs in Sydney, this stunning new home has been designed with attention to detail throughout. This attention to detail was evident when the owners and architect Stubbs Design appointed Lift Shop to install a 2 stop E2, which...

When the owners of this brand new home in Vaucluse wanted the best of the best, the obvious choice for a home lift was Lift Shop's E2. Working closely with both the client and Tobias Partners Architects, the finishes included: Configuration – Adjacent entry Sliding...

For this property in Fairlight no compromises were made, as such the best product for the job was Lift Shop’s E2 sliding door home elevator. On the ground level, the owners opted to clad the shaft in a striking blue stone, which was contrasted by our frameless white...

A newly constructed home in Beverley Hills stayed true to classic French architecture. This design style flowed through the E2 home elevator installed by Lift Shop. The finishes included: Side Opening Sliding Doors – finished in Brushed Stainless Steel Walls – RHS...

WITH A design brief that left nothing to chance, this awe-inspiring 4 level home in St Kilda is nothing short of sensational. As such, we were proud to work with the designer, builder and owner to deliver a lift that held up our end of the bargain too. For a seamless...

THIS PROPERTY in Maroubra is nothing short of stunning, every element of this home was carefully considered from the designer fixtures and fittings through to the custom sliding door elevator installed by Lift Shop, which included: Lift Type – E2 Centre Opening...

THIS PROPERTY in Hamilton is certainly modern living at its best with no compromises on finishes throughout, it was only fitting that our E2 sliding door lift was selected for the project. As such, the home's designer lift decor included: Solid two piece sliding...

THIS OLD Queenslander was not complete with out the addition of an elevator. As such, Lift Shop was delighted to install a 3 stop E2 lift which included: Solid two piece sliding doors– finished in Similinox F12PPS Walls – RHS Grigio PPS1 , REAR  Grigio PPS1 with a...

Classic Elegance x 2 The owner of this property wanted nothing but the best for this new duplex development. Working closely with both the client and Mary Durack Interior Design, Lift Shop installed 2 x 4 Stop E2 Lifts. The finishes that were selected to achieve an...

Precision Plus HOW DO you install a lift into a partial steel shaft sitting on top of a masonry shaft surrounded by a wrap-around circular staircase – very carefully !! But that’s ok – it’s what we do. Designing in collaboration with all parties from the outset,...

One For Everyone PROVIDING THE same level of convenience for all, the owner/developer decided to put lifts into all three homes for this new project in Wellington Point, Qld. The lift of choice was the E2 with maximum use of polished stainless steel and glass for a...

Home Comforts WHEN AN extra wing was added to this Westwood home, it was only natural to also include a lift into the design to make sure access between the two levels was not a problem. Working in with the neutral colours schemes of the home, the E2 had cream...

Hollywood Glam MODERNISING THIS older style property in the Hollywood Hills gave the owner the perfect opportunity to make sure the lift also did its part. With an existing original circular shaft, the customised sized to suit E2 with polished stainless steel doors...

Up or Down ENTERING THIS  palatial home on the Newport Coast, the owners have the choice of either taking the lift down to the cinema and games rooms or up to the private bedroom areas. To make the most of the two exterior windows on the shaft, the rear wall of the...

WANTING TO make access between the 2 levels of this Melbourne home just that little easier, the owners and builder worked with our sales and design team in our Richmond showroom to achieve just that. Making the most of the space available, the resulting cabin of...

WITH EVERY single detail carefully planned in this new Eastern Suburbs property, the three level lift was also given the same level of attention and the finished result on the E2 has been nothing short of amazing. The landing doors on levels 1 and 3 were powdercoated...

This stylish Toorak home had the perfect position in the courtyard outside the dining room for the placement of an E2 private elevator with a glass shaft. The only requirements for the owners were minimal modifications to the existing windows in order to create door...

SOME HOMES lend themselves better than others to functionally and aesthetically retrofitting a lift. When the need arose for this Melbourne home, Lift shop Installed an ElfoLift 2 with a bones only shaft into the corner of the double garage (but with such a small...

SITUATED IN the picturesque suburb of Clareville, this contemporary new home is spread over four levels so it was only natural to also include a lift into the design. The ElfoLift 2 installed here has an opposite through car design to best suit the floorplan of the...

WITH A distinctive and prominent position, the ElfoLift 2 takes pride of place inside this new home in Sydney’s Randwick. Being such a focal point, the owners wanted to make sure that first impressions counted and they didn’t disappoint with the beautiful frameless...